Another Monster Dining Table - DONE!

Well, the Docs finally figured out that I'd somehow screwed up the measurements on the original dining table I made for them.  Remember this one?

I'm not sure how it happened (ok, I just read the measurements wrong - no big deal, right???), but the width of this table was only 33".  It really worked just fine for dining, but the problem was that with plates on each side of the table there was no room for serving dishes in the center of the table.  When we ate at the Docs, it was always buffet style!

Several months ago they mentioned that they might want to increase the width of the table.  We talked about just making a new top and replacing the original top with that.  However, I wasn't sure if the base was wide enough to support the additional 7-10" they were looking for.  

I didn't jump right on this project, but after 5-6 months I started feeling bad and brought it up again.  I asked if they wanted the same style or something different, and most importantly what size they wanted the table to be.  They came up with the size and said they were open for something different.  During the time I'd been thinking of this I came across a web site for a designer of some very interesting furniture pieces.  (http://thedesignwalker.tumblr.com/post/127306051246/meyer-von-wielligh-furniture) I absolutely loved a leg that he'd used on a table and showed that to the Docs.  They loved it, too, and decided that they liked not just the leg, but the table.  Here's what started this whole, challenging process:  

Isn't that the sleekest, simplest leg EVER???  Well, I thought it was cool, and so did they; I had a starting point.  I wasn't sure I could pull off this leg - and I really didn't.  But, I came kind of close.  It took a lot of thought,  

My starting point - which underwent several changes when I just couldn't work out the angles!!

A whole lot of planning and trial runs:

A whole lot of glue:

And sanding:

And, then I had the table top:

And, then I had legs:

 And, finally, a table!  The legs aren't as beautiful (nor are they as neatly done!) as the inspiration table's legs, but they are still sleek and pretty.

After adding a lot of support to the bottom of the table and legs, it was ready for the staining to begin.  The Docs wanted a finish that was a little more brown than the old table (that was a gray-brown).  Since the original table was built, they've added a few mid-century pieces to the mix.  This table sits adjacent to their more modern style living room pieces - the color of which is a warm reddish brown.
So, finishing went like this:

1. Apply Minwax golden oak stain, let dry overnight.
2. Sand off most of the golden oak.
3. Apply Minwax weathered oak stain, let dry overnight.
4. Sand off most of the weathered oak stain.
5. Apply another coat of Minwax golden oak stain, let dry overnight.
6. Sand off most of that stain.
7. Wipe off fine dust with damp cloth, let dry.
8. Apply coat of polyurethane, satin finish, and let dry overnight.
9. Lightly sand and wipe clean
10. Apply coat of polyurethane, satin finish, and let dry overnight.
11. Lightly sand and wipe clean.
12. Apply coat of polyurethane, satin finish, and let dry 2 hours.
13. Apply coat of polyurethane, satin finish, and let dry overnight.
14. Lightly sand and wipe clean.
15. Apply coat of polyurethane, satin finish and let dry 2 hours.
16. Apply coat of polyurethane, satin finish and let dry.
17. DONE!!!

Then, build bench and finish as above!  (did reduce the number of coats of poly to 3! - call me lazy!)

I delivered the table and bench today, Father's Day.  

They are very happy with it.  The table is a good mix of their rustic and modern style, is sturdy - DIL Doc can dance on the table if she wants, and it's big enough to easily sit 8 - 10 with room for serving platters on the table!  I'm happy to have challenged myself and followed through to the finish - the math for this one had me wishing I'd paid more attention to geometry in high school (well, in grade school, too - even a better understanding at that level would have helped!!)  And, I made sure that every inch of this sucker has been sanded smooth - so,  Little Doc can crawl and stand around this table without worry of splinters.

I'm looking forward to dinner at the Docs!

Leftover chairs?? What to do, what to do?

With all of the tables and chairs I've purchased over the past couple of years, it was bound to happen - I had chairs sitting in my garage just taking up space.  I suppose I could have carted them up to Logger daughter, but then she'd feel obligated to do something with them.  Nope, that just wasn't fair!

So, I hmmmed and hawwwed and finally decided to try making something I've seen a lot on Pinterest and other DIY blogs.  

From two chairs picked up at a thrift store for probably less than $5 each, some scraps of lumber that I always have in my garage, this is end result.  It's kind of cute, comfortable to sit your weary bones on - for a while anyway -, and I think it would be cute and functional in an entryway (a place to sit and take off shoes-with a place to store them!); a front porch (to sit and sip a beer or two), or patio (to sit and make sure the kids don't drown!).  I'll be offering it up for sale, but if it doesn't sell, it will sit poolside, along my back wall, between two large pots of geraniums.

It would be perfect in an entryway ( It's been stained dark, painted (hints of a tropical green and white), distressed and has a few coats of waterbased polyacrylic finish/sealer applied.

Any takers?  

Are you ready for summer?
Any plans for pool parties and BBQ's?

Don't pay any attention to the messy garage in the backgrount - I have something coming that will be really, really cool, or a complete disaster - in which case you'll never hear about it!