My son and daughter-in-law, the Docs, just recently purchased what they hope to be their "forever" home. It's large, beautiful inside and out, and really, really wasn't even close to a fixer-upper - he wanted something finished! I can't think where Don and I went wrong with this kid. :-)
I wanted to give them a housewarming gift that they actually needed, not just wanted. Since this new home is so much larger than their condo, with lots more rooms to fill, it was pretty easy to come up with something they needed - a dining room table. Doctor Doc had been sending me pictures of some beautiful rustic tables, so finding something they wanted turned out to be easy, too! She really liked this one from Pottery Barn. It's rustic, but "refined", too!
My sis and I took a trip to PB and I crawled all around and under this table! Bless her heart, she was not even the teensiest bit embarrassed! The table was nice to look at, but the reclaimed pine top was actually pretty rough. I'd be afraid someone could get splinters! And, it was rickety. And, the price started at $1200! But, I thought I could make something very close to it in appearance, the finish, on the other hand, was something I figured I'd end up struggling with.
I found a plan for the table at Ana-white.com (great place for fairly easy to follow plans for all kinds of things!). So, I was set (just already worrying about the finish!). As luck would have it, I came across a finish that both the Docs liked - weathered but finished looking. Where else, but on Ana's site - thank you Jen Woodhouse of House of Wood
Here's how it went: First the legs and base
Then, I joined the boards for the table top.
Then, I made sure it was all going to fit together the way I anticipated! And, it did - whew!!!
Then, I drilled all the areas where the bolts would be added. I improvised on the "iron" pieces - using a mixture of electrical pieces. Camping daughter told me after it was finished that she was really worried I'd lost all sense when I told her what I was using for the cross pieces that would make it look more like the PB table - she was very relieved - and surprised - when she saw the finished table!
And, now for the finish! All 9 layers of it!
3. First stain - Special Walnut |
4. Second stain - Weathered Oak |
5. Whitewashed - Brush on, wipe, wipe, wipe, wipe off! |
6. Mixed stains (Special Walnut and Weathered Oak) |
7, 8, 9. three coats of Spar satin urethane are applied to all surfaces. |
Here it is - in their new home!
Welcome home, Docs. I wish you many happy years in your new home!
(and at least one little baby to pound holes into the table top!)
Love you lots!
No comments:
Post a Comment
Thanks for commenting!